PIPELINE PIGS
Conical Cup

Apache’s Conical Cup, steel bodied pigs are designed for a variety of pipeline applications such as batching, condensation removal, purging or light cleaning. Pipeline pigs mounted with conical cups can traverse pipeline anomalies of up to 25% without damage to inline auxiliary equipment. Conical cup pigs are available in 2 to 4 cup configurations and can be adapted to include, brushes, gauge plates and other components.

Filming Pigs 16 – 48″ (406 – 1219 MM)

Stop corrosion in its tracks. That’s what we set out to do when we developed the Apache Filming Pig. As every pipeline engineer knows, coating the interior of the line with a quality corrosion inhibitor is one of the best ways to prevent corrosion. The challenge? How to apply inhibitor in a controlled manner. The Filming Pig was designed for one purpose: to apply a film of inhibitor with 360-degree coverage on the interior pipe wall.

The unique design of the 16” – 48” Filming Pig features a hollow front mandrel with two equalization ports that are removed from the center of the mandrel. By doing so, inhibitor is allowed to travel through the hollow front mandrel and two port holes located on either side. Inhibitor becomes trapped between the front conical cup, back three soft filming discs and support disc, leaving a film of inhibitor on the pipe wall.

Every Apache FP 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that need to be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings.

Designed to negotiate 1.5D bends, the Filming Pig moves reliably through piping systems.


  • Inhibitor travels through the hollow front mandrel and two port holes located on either side of the mandrel, ultimately leaving a film of protective corrosion inhibitor on the pipe wall.

    UM2 CONICAL CUP 3 – 14″ (76 – 356 MM)

    Primarily used to batch dissimilar fluids, the Series UM2 conical cup pig is also very effective for pipelines in need of light cleaning. How is this possible? The answer lies in the three versions of the Series UM. The two-cup design of the UM2 pig provides a positive seal between fluid interfaces for efficient batching. The UM3 three-cup and UM4 four-cup design pigs are both used to gently clean pipelines and for batching and separation operations. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM2 pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    3″4.6256.6253.3752.070-5802-03
    4″5.8758.0004.3753.070-5802-04
    6″8.25011.6256.5001070-5802-06
    8″10.50014.1258.3751570-5802-08
    10″12.75017.12510.5002770-5802-10
    12″15.12519.62512.5003970-5802-12
    14″17.50022.12514.0004870-5802-14

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Circular flange brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • UT Mandrel to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    UM2 CONICAL CUP 16 – 48″ (406 – 1219 MM)

    Primarily used to batch dissimilar fluids, the Series UM2 is also very effective for pipelines in need of light cleaning. How is this possible? The answer lies in the three versions of the Series UM. The two-cup design of the UM2 pig provides a positive seal between fluid interfaces for efficient batching. The UM3 three-cup and UM4 four-cup design pigs are both used to gently clean pipelines and for batching and separation operations. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM2 pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″21.00024.00015.8756370-5802-16
    20″23.75027.37520.0009870-5802-20
    22″27.62531.62522.00013770-5802-22
    24″29.50033.87524.00016170-5802-24
    30″36.75041.87529.87527370-5802-30
    36″45.75052.25036.00042170-5802-36
    42″54.12561.37542.00061470-5802-42
    48″60.37568.62548.00075470-5802-48

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache UM2 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • CARVER Discs

    • Rattlers

    UM3 CONICAL CUP 3 – 14″ (76 – 356 MM)

    Primarily used to batch dissimilar fluids, the Series UM3 is also very effective for pipelines in need of light cleaning. How is this possible? The answer lies in the three versions of the Series UM. The two-cup design of the UM2 pig provides a positive seal between fluid interfaces for efficient batching. The UM3 three-cup and UM4 four-cup design pigs are both used to gently clean pipelines and for batching and separation operations. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM3 pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    3″4.8756.7503.3753.070-5803-03
    4″6.1258.6254.3754.070-5803-04
    6″9.25012.6256.5001370-5803-06
    8″12.00015.6258.3752070-5803-08
    10″14.87519.25010.5003670-5803-10
    12″16.62521.25012.5005270-5803-12
    14″19.50024.25014.0006470-5803-14

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Circular flange brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • UT Mandrel to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • Rattlers.

    UM3 CONICAL CUP 16 – 48″ (406 – 1219 MM)

    Primarily used to batch dissimilar fluids, the Series UM3 is also very effective for pipelines in need of light cleaning. How is this possible? The answer lies in the three versions of the Series UM. The two-cup design of the UM2 pig provides a positive seal between fluid interfaces for efficient batching. The UM3 three-cup and UM4 four-cup design pigs are both used to gently clean pipelines and for batching and separation operations. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM3 pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″25.00028.00015.8758970-5803-16
    20″29.75033.37520.00014570-5803-20
    22″34.37538.25022.00019770-5803-22
    24″36.50040.87524.00023170-5803-24
    30″45.50050.62529.87538570-5803-30
    36″55.12561.75036.00058670-5803-36
    42″66.25073.50042.00086070-5803-42
    48″74.62583.00048.000106170-5803-48

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache UM3 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • Rattlers

    UM4 CONICAL CUP 3 – 14″ (76 – 356 MM)

    Primarily used to batch dissimilar fluids, the Series UM4 is also very effective for separating fluids and looking after pipelines in need of light cleaning. How is this possible? The answer lies in the three versions of the Series UM. The two-cup design of the UM2 pig provides a positive seal between fluid interfaces for efficient batching. The UM3 three-cup and UM4 four-cup design pigs are both used to gently clean pipelines and for batching and separation operations. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM4 pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    3″6.0008.0003.3753.070-5804-03
    4″7.0009.5004.3755.070-5804-04
    6″10.25013.6256.5001570-5804-06
    8″13.50017.1258.3752570-5804-08
    10″17.00021.25010.5004570-5804-10
    12″18.75023.75012.5006570-5804-12
    14″21.62526.37514.0008170-5804-14

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Circular flange brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • UT Mandrel to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    UM4 CONICAL CUP 16 – 48″ (406 – 1219 MM)

    Primarily used to batch dissimilar fluids, the Series UM4 is also very effective for separating fluids and looking after pipelines in need of light cleaning. How is this possible? The answer lies in the three versions of the Series UM. The two-cup design of the UM2 pig provides a positive seal between fluid interfaces for efficient batching. The UM3 three-cup and UM4 four-cup design pigs are both used to gently clean pipelines and for batching and separation operations. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM4 pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″29.00032.12515.87511570-5804-16
    20″35.75039.37520.00019170-5804-20
    22″41.00044.87522.00025770-5804-22
    24″43.50047.87524.00030170-5804-22
    30″54.25059.37529.87549870-5804-30
    36″64.62571.12536.00075170-5804-36
    42″78.50085.75042.000111870-5804-42
    48″84.87593.25048.000133870-5804-48

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache UM4 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic, or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • CARVER Discs

    • Rattlers

    UM2X CONICAL CUP 16 – 48″ (406 – 1219 MM)

    The Series UM2X with block brush provides light cleaning during the construction phase, as well as regular pipeline operations. How is this possible? The answer lies in the three versions of the UMX. While the two-cup design of the UM2X pig efficiently cleans and scrapes pipelines, the UM3X three-cup and UM4X four-cup design pigs. They are both used to gently clean pipelines. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM2X pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″22.00025.00015.87510460-5142-16
    20″27.25030.87520.00016560-5142-20
    22″29.12531.50022.00021260-5142-22
    24″29.50033.87524.00023060-5142-24
    30″39.75044.87529.87538860-5142-30
    36″45.75052.25036.00055160-5142-36
    42″54.12561.37542.00076360-5142-42
    48″60.37568.62548.00093760-5142-48

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache UM2X 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • Urethane Plow Blades – Designed to replace a XB block brush, the 3-Rib urethane removes paraffin wax and similar deposits from the pipe wall that normally collect and cram between the bristles of a block brush. Our plow blade profile performs a similar function to the 3-Rib, but is used primarily for pipe sizes 16” – 18”. Both blade types are also excellent tools for removing debris in non-metallic or internally coated pipe without damaging the pipe wall coating.

    • Rattlers.

    UM3X CONICAL CUP 16 – 48″ (406 – 1219 MM)

    The Series UM3X with block brush provides moderate cleaning during the construction phase, as well as regular pipeline operations. How is this possible? The answer lies in the three versions of the UMX. While the two-cup design of the UM2X pig efficiently cleans and scrapes pipelines, the UM3X three-cup and UM4X four-cup design pigs each provide a positive seal between dissimilar fluids. They are both used to gently clean pipelines. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM3X pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″26.00029.00015.87512960-5143-16
    20″33.25036.87520.00021260-5143-20
    22″35.87539.75022.00026860-5143-22
    24″36.50040.87524.00030160-5143-24
    30″48.50053.62529.87550260-5143-30
    36″55.12561.75036.00071660-5143-36
    42″66.25073.50042.000101560-5143-42
    48″74.62583.00048.000124460-5143-48

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache UM3X 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • Urethane Plow Blades – Designed to replace a XB block brush, the 3-Rib urethane removes paraffin wax and similar deposits from the pipe wall that normally collect and cram between the bristles of a block brush. Our plow blade profile performs a similar function to the 3-Rib, but is used primarily for pipe sizes 16” – 18”. Both blade types are also excellent tools for removing debris in non-metallic or internally coated pipe without damaging the pipe wall coating.

    • Rattlers.

    UM4X CONICAL CUP 16 – 48″ (406 – 1219 MM)

    The Series UM4X with block brush provides moderate cleaning during the construction phase, as well as regular pipeline operations. How is this possible? The answer lies in the three versions of the UMX. While the two-cup design of the UM2X pig efficiently cleans and scrapes pipelines, the UM3X three-cup and UM4X four-cup design pigs are used to gently clean pipelines. They are typically used for longer distance operations.

    Designed to negotiate 1.5D bends, the Series UM4X pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″30.00033.12515.87515460-5144-16
    20″39.25042.87520.00025760-5144-20
    22″42.50046.37522.00032460-5144-22
    24″43.50047.87524.00037260-5144-24
    30″57.25062.37529.87561360-5144-30
    36″64.62571.12536.00087960-5144-36
    42″78.50085.75042.000126460-5144-42
    48″88.87597.25048.000155060-5144-48

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies without damaging essential inline auxiliary equipment.

    • Every Series UM pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache UM4X 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • Urethane Plow Blades – Designed to replace a XB block brush, the 3-Rib urethane removes paraffin wax and similar deposits from the pipe wall that normally collect and cram between the bristles of a block brush. Our plow blade profile performs a similar function to the 3-Rib, but is used primarily for pipe sizes 16” – 18”. Both blade types are also excellent tools for removing debris in non-metallic or internally coated pipe without damaging the pipe wall coating.

    • Rattlers.

    DMD CONICAL CUP 3 – 14″ (76 – 356 MM)

    Looking for more effective cleaning and sealing capacity? Then look no further than the Series DMD. Every pig in the series is equipped with two sealing discs and two Series M Cups. These multiple sealing components create a positive seal between dissimilar fluids, while simultaneously providing a bigger surface area. As a result, its sealing capacity, scraping capability, and overall cleaning ability is greatly improved.

    Designed to negotiate 1.5D bends, the Series DMD pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    3″5.6257.0003.3752.070-6850-03
    4″7.2508.8754.3753.070-6850-04
    6″10.12512.3756.5001170-6850-06
    8″11.87514.1258.3752070-6850-08
    10″15.50018.12510.5003170-6850-10
    12″18.12520.87512.5004670-6850-12
    14″20.50023.25014.0005270-6850-14

    • The DMD pig is configured to offer a sealing arrangement that is used to separate dissimilar fluids, and to lightly scrape pipelines during longer distance operations.

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series DMD pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • To use a Series DMD pig for different applications, cups can simply be added or reconfigured.

    • Circular flange brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • UT Mandrel to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • CARVER Discs

    DMD CONICAL CUP 16 – 48″ (406 – 1219 MM)

    Looking for more effective cleaning and sealing capacity? Then look no further than the Series DMD. Every pig in the series is equipped with two sealing discs and two Series M Cups. These multiple sealing components create a positive seal between dissimilar fluids, while simultaneously providing a bigger surface area. As a result, its sealing capacity, scraping capability, and overall cleaning ability is greatly improved.

    Designed to negotiate 1.5D bends, the Series DMD pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″24.50025.50015.8757570-6850-16
    20″28.00029.00020.00012270-6850-20
    22″32.37533.37522.00016370-6850-22
    24″34.87535.87524.00019670-6850-24
    30″43.00044.12529.87532870-6850-30
    36″53.62555.00036.00052070-6850-36
    42″62.87564.37542.00075570-6850-42
    48″70.50072.12548.00096270-6850-48

    • The DMD pig is configured to offer a sealing arrangement that is used to separate dissimilar fluids, and to lightly scrape pipelines during longer distance operations.

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies of up to 20% without damaging essential inline auxiliary equipment.

    • Every Series DMD pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • Every Apache DMD 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and in-line auxiliary equipment, preventing damage.

    • To use a Series DMD pig for different applications, cups can simply be added or reconfigured

    • Circular flange brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • CARVER Discs

    • Rattlers

    DMDX CONICAL CUP 16 – 48″ (406 – 1219 MM)

    Looking for more effective cleaning and sealing capacity? Then look no further than the Series DMDX. Every DMDX is equipped with two sealing discs and two Series M Cups. What sets the DMDX apart is that it features brushes that further enhance cleaning performance. These multiple sealing components provide a bigger surface area. As a result, its sealing capacity, scraping capability, and overall cleaning ability is greatly improved.

    Designed to negotiate 1.5D bends, the DMDX pig moves reliably through piping systems.

    SIZEABCWEIGHTPART NUMBER
    16″25.50026.50015.87511560-6900-16
    20″31.50032.50020.00018760-6900-20
    22″33.87534.87522.00023660-6900-22
    24″34.87535.87524.00026460-6900-24
    30″46.00047.12529.87544460-6900-30
    36″53.62555.00036.00065360-6900-36
    42″62.87564.37542.00091260-6900-42
    48″70.50072.12548.000110660-6900-48

    • The DMDX pig is configured to offer a sealing arrangement that is used to separate dissimilar fluids, and to moderately scrape pipelines during longer distance operations.

    • Given that anomalies are a fairly common feature of a pipeline scheduled for maintenance, it’s reassuring that pigs mounted with conical cups can traverse pipeline anomalies without damaging essential inline auxiliary equipment.

    • Every Series DMDX pig is equipped with Apache Series M cups. As with all of Apache products, the Series M cup was especially developed to perform efficiently and reliably. To maximize durability, it’s made from Reliathane, Apache’s special blend of wear-resistant polyurethane.

    • The large wearing surface of the cup promotes longer life, while product pressure holds the cutting edge firmly against the pipe wall.

    • Every Apache DMDX 16”- 48” pig is manufactured with by-pass ports. These ports feature threaded plugs that can be removed, should by-pass be required. By removing the by-pass plugs, a portion of product flow is redirected through these openings. The debris is suspended in the turbulent flow and transferred ahead of the pig.

    • Standard bumper noses cushion the pig and help to protect in-line auxiliary equipment, preventing damage.

    • Circular flange brushes or block brushes in the following types and trim materials:
    1. Trim types – flat wire or pencil.
    2. Trim material – carbon steel, stainless steel, plastic or tin-coated.

    • Aluminum or steel gauging plates in slotted or standard styles.

    • Transmitter housing to accommodate electronic tracking equipment.

    • Magnets can be used to either collect ferrous and other construction debris, or they can be used to provide a change in magnetic field required by non-intrusive pig signaler detection devices.

    • Urethane Plow Blades – Designed to replace a XB block brush, the 3-Rib urethane removes paraffin wax and similar deposits from the pipe wall that normally collect and cram between the bristles of a block brush. Our plow blade profile performs a similar function to the 3-Rib, but is used primarily for pipe sizes 16” – 18”. Both blade types are also excellent tools for removing debris in non-metallic or internally coated pipe without damaging the pipe wall coating.