MAGNETS

Apache Magnets Apache Magnets

The addition of magnets to a cleaning pig is often used to remove iron-sulfides and ferrous debris ranging from fine dust to welding rods from gas and hydrocarbon pipelines. Brushes can often be used in conjunction with magnets to assist in the ferrous debris being removed from the pipe wall. The resulting ferrous debris can then be collected with the magnets mounted on the pig. Magnets can also be utilized to trip a magnetic non-intrusive pig signaler (Bandit). Detection devises are looking for a change in magnetic field for them to operate and indicate to an operator when a pig has passed a critical section in the line or has arrived at the launcher/receiver.

    Type: Neodymium Iron Boron magnets
    Temperature Rating: 100 deg C / 212 deg F suggested maximum
    Sizes:

    – Cased, Small Block (6” – 14” pigs)
    Part Number #95011314

    – Cased, Large Block (16” – 48” pigs)
    Part Number #95011348

    – Circular Rare Earth Magnet N42 (6” – 14”)
    Part Number #95138214

CD52 TRIP MAGNETS

Apache Magnets

There are three compact and powerful permanent magnets for use with the CD52 Bandit Non-Intrusive Pig Passage Signaler. These magnets may be attached to or placed inside almost any type of pipeline pig and detected at both low and high speeds by the CD52 system.

    The CD52-M1 Trip Magnet is a very small and very powerful trip magnet designed to be used with the CD52 Bandit Non-Intrusive Pig Passage Signaler in pipelines 4″ to 12″ to indicate passages to the CD52 Bandit system.

    The CD52-M1 is an epoxy-encased magnet with a PVC jacket and a ½-13 UNC mounting stud.

    Max Operating Temp: 200 degrees Celsius
    Magnet Type: Neodymium

    The CD52-M2 Trip Magnet is a small and very powerful trip magnet designed to be used with the CD52 Bandit Non-Intrusive Pig Passage Signaler in pipelines 14″ to 30″ to indicate passages to the CD52 Bandit system.

    The CD52-M2 is an epoxy-encased magnet with a PVC jacket and a ½-13 UNC mounting stud.

    Max Operating Temp: 200 degrees Celsius
    Magnet Type: Neodymium

    The CD52-M3 Trip Magnet is a large and very powerful trip magnet designed to be used with the CD52 Bandit Non-Intrusive Pig Passage Signaler in pipelines 32″ to 48″ to indicate passages to the CD52 Bandit system.

    The CD52-M3 is an epoxy-encased magnet with a aluminum jacket and a ½-13 UNC mounting stud.

    Max Operating Temp: 200 degrees Celsius
    Magnet Type: Neodymium

GAUGING PLATES 2 – 48″ (51 – 1219 MM)

Apache Gauging Plates Apache Gauging Plates

All Gauge Plates are cut out of 6061 T6 aluminum and come standard with the below dimensions.

Gauge Plates are manufactured to customer supplied O.D +/- 2mm tolerance.

SIZE I/D. (in) WEIGHT (lbs) PART #
2″ 9/16 0.10 95-0406-02
3″ 9/16 0.20 95-0406-03
4″ 9/16 0.40 95-0406-04
6″ 1 1/16 0.80 95-0406-06
8″ 1 1/16 1.30 95-0406-08
10″ 1 1/16 2.00 95-0406-10
12″ 1 1/16 2.80 95-0406-12
14″ 1 1/16 4.00 95-0406-14
SIZE I/D. (in) BOLT CIRCLE
DIAMETER (in)
# HOLES PART #
16″ 8 3/4 11.00 8 95-0316-16
18″ 10 7/8 12.75 8 95-0316-18
20″ 10 7/8 13.50 12 95-0316-20
22″ 10 7/8 13.50 12 95-0316-22
24″ 14 1/8 16.50 14 95-0316-24
26″ 14 1/8 16.50 14 95-0316-26
28″ 16 1/8 19.50 16 95-0316-28
30″ 16 1/8 19.50 16 95-0316-30
32″ 20 1/8 24.00 24 95-0316-32
34″ 20 1/8 23.00 18 95-0316-34
36″ 20 1/8 25.00 22 95-0316-36
38″ 22 1/8 27.00 24 95-0316-38
40″ 22 1/8 26.00 24 95-0316-40
42″ 24 1/8 30.00 24 95-0316-42
48″ 32 1/8 36.00 24 95-0316-48

SIZING RINGS 2 – 48″ (51 – 1219 MM)

Apache Sizing Rings Apache Sizing Rings

Utilizing our new CNC Water Jet Cutting System, Apache can manufacture Pig Sizing Rings to any customer supplied dimensions, quickly and cost effectively.

* 2 – 14″ Sizing Rings are cut with no handles
* 16 – 48″ Sizing Rings are cut with four (4) handles

TRANSMITTER HOUSING

Apache Transmitter Housing

POLYURETHANE BLADE

Apache Polyurethane Blade